The method of judging the quality of clean plate
净化板质量的判断方法
The purification board can be produced according to the requirements of the demand-side project length and width, combined installation, not only can greatly reduce the cost of the basic engineering and structural engineering of the building, but also can be disassembled many times, convenient construction and installation, and the comprehensive benefit is very significant, is widely used in the construction industry, and has become a new type of building materials.
净化板可按需方工程要求定长定宽生产，组合安装，不仅能大量减少建筑物的基础工程和结构工程费用，且能多次拆装，施工安装方便，综合效益十分显着，被广泛应用在建筑行业中，成为目前新型的建筑材料。
1, judging from the price of the purification board, all products are a point of price and a point of goods, the natural price of high-quality products will be higher, if the price is too low, it should be carefully considered.
1、从净化板价格来判断，所有的产品，都是一分价钱一分货，优质的产品自然价格就会高一点，如果价格太低的话要慎重考虑。
After the price comparison, it is necessary to observe the quality of the purification board.
价格对比完之后就要观察净化板的质量。
It is also observed from the thickness of the substrate and the thickness of the coating of the purification plate, which is composed of the substrate and colored peritoneum or coating.
还要从净化板的基板厚度和覆膜的厚度来观察，净化板是由基板和彩色的腹膜或者镀层构成的。
Standard product substrate thickness is 0.02~0.05mm, if the thickness is high or low, are inferior purification board, must not buy.
标准的产品基板厚度是0.02~0.05mm,如果厚度偏高或偏低，都属于劣质的净化板，一定不要购买。
The thickness of the film or coating is generally only 0.15mm or less, which looks very thin, so it must be judged in accordance with the standard thickness when purchasing.
覆膜或者涂层厚度一般只有0.15mm以下，看起来非常薄，所以在选购时一定要按照标准的厚度来进行判断。
