Notes on rock wool manual purification board:
岩棉手工净化板注意事项：
Unloading precautions:
卸车注意事项：
1. When unloading the car, it should be unloaded on a flat and robust ground to ensure that the surface of the product is not deformed by the influence of the ground.
1.卸车时应卸在平坦、健壮的地上上，保证商品的面不受地上影响而变形。
2. Mechanical unloading: advocating the use of wide shovel forklift to avoid damage to the plate.
2.机械卸车：主张用宽铲叉车，以避免咯伤板材。
3. Manual unloading: do not extend the board parallel to avoid scratching the board.
3.人工卸车：不得对板平行迁延，以避免划伤板材。
When unloading or transferring the long gauge board, the multi-point symmetry method is used to avoid bending the board.
对于长规范板卸车或转移时，选用多点对称方法，以避免板材弯折。
Stacking precautions:
堆放注意事项：
1. Plastic foam should be padded on the ground when stacking.
1.堆放时与地上接触需垫上塑料泡沫。
2. Bulk height ≤1.5m/ pile.
2.散装高度≤1.5m/摞。
3.EPS, glass wool, XPS, rock wool and other goods that are susceptible to moisture can not be placed in the open air, and other goods should be tightly wrapped with waterproof tarpaulin when placed in the open air.
3.EPS、玻璃丝棉、XPS、岩棉等易受潮的商品不能露天放置，其它商品露天放置时需用防水篷布紧密包裹。
Equipment precautions:
设备注意事项：
1. The condition of the plate equipment is that the main body of the plant should meet the requirements of the equipment, ensure the flatness of the ground, and take this as the norm according to the direction of the protective film.
1.板材设备的条件是厂房主体要契合设备请求，保证地上平坦度，以此为规范依照保护膜字样方向依次设备。
2. If personnel need to walk on the board after the roof equipment, the plane light density board or wood should be placed on the bearing surface of the roof, so as to clean the overall force of the board and reduce the harm.
2.顶板设备后若需人员在板上行走，则应在顶板的受力面方位平面轻质密度板或木板，从而使洁净化板整体受力，削减危害。
Cleaning and maintenance precautions:
清洁与保养注意事项：
1. Do not clean the surface with corrosive solvent.
1.勿用具有腐蚀性溶剂清洁板面。
2. Avoid humidity and keep the environment dry.
2. 现场环境应避免潮湿保持环境干燥。
