Waterproof construction of partition wall
隔墙防水施工
There are many wet processes in the PCD process, and the solution used in the production process is corrosive, which corrods the color steel plate wall and affects the life of the partition wall. Therefore, it is suggested that when designing the partition wall of the workshop, a cement foundation or special brick of civil structure with a height of 80-100㎜ and a width of 50㎜ is made under the partition wall of the color steel plate, and then the color steel plate is made on it.
PCD制程有很多湿制程，并且生产过程中使用的溶液有腐蚀性，对彩钢板墙体有腐蚀现象，影响隔墙寿命，因此建议设计该车间隔墙时在彩钢板隔墙下面做一个80-100㎜高，50㎜宽的土建结构的水泥基础或是特制的砖块，再在上面做彩钢板，
If it is one side of the purification workshop, use the company's specially designed and used profile (large arc) to ensure that it is clean
如果是净化车间的一边，用本公司特别设计和用过的型材（大圆弧），保证符合洁净
2, color steel plate wall anticorrosion construction
2、彩钢板墙面防腐施工
The PCD process has many wet processes and is generally corrosive.
PCD制程有很多湿制程，并且一般有腐蚀性。
Corrosion of the workshop partition wall color steel plate, often color steel plate will not be used for a long time, forced to replace.
对该种车间隔墙彩钢板产生腐蚀，往往彩钢板使用不会久，被迫更换。
The company has done similar projects in the past, for the workshop of corrosive goods, the conventional anti-corrosion treatment of color steel panel wall is: a.
本公司过去做过类似工程，对有腐蚀性物品的车间，彩钢板墙常规防腐处理是：a.
Wall coating with anticorrosive cement;
墙面用防腐性水泥喷涂；
b. Paint the wall panel with anti-acid and alkaline paint.
b.墙面用防酸碱性油漆刷面板。
(This can extend the life of the color steel plate by 5-6 years, and the stone engraving line is normally used for about 3 years, and it should be replaced.)
（这样可以使彩钢板寿命延长5-6年，石刻线正常一般使用3年左右，要考虑更换。）
3, color steel ceiling over the rise and shrink joint construction scheme
3、彩钢板顶棚过升缩缝的施工方案
The top of the color steel plate ceiling is T-word aluminum, one side is fixed in T-word aluminum, and the other side is on T-word aluminum.
彩钢板吊顶正对升缩缝的上面用T字铝，一边固定在T字铝，另一边搭在T字铝上。
